Table of Contents
Advertisement
Instructions
FXS Port: Connected to telephones. To enter IVR mode, enter " * * password #" after
hearing
enter the function code. (Please refer to the Advanced Settings on page 35 for these
codes)
FXO Port: to use IVR functions, dial the phone number of FXO Port using an external
line. You will hear the instruction "enter value", and then enter a PIN number. The factory
default code is blank. Enter "**#" as above. You are now in IVR setting mode.
Example: The factory default code is blank. Enter "**#". You are now in IVR setting mode, enter
the desired code. E.g.: if the code is 1234, then enter "**1234#". Or If your password is abc123
then you access IVR by pressing ***414243010203#
Once the first setting or query has been completed, you will hear a dial tone. Then use
the same procedure to make a second query or setting. To exit IVR mode, simply hang
up the phone.
Example: enter "**#" (You are now in IVR mode)
system responds with an IP address
(to set IP address)
Save Settings
After entering IVR mode, dial 509 (Save Settings). Wait for about 3 seconds and after hearing a
confirmation tone "1", hang up the phone. Please reboot the Gateway to enable the new
settings.
To inquire about current Gateway's WAN Port IP address
After entering IVR mode, dial 101. The system will repeat the current WAN Port IP address.
If the system does not repeat the IP address, it indicates that the Gateway is not currently
connected to the Internet. Please check if the cable connection, account number, and password
are correct.
Recorded Voice File
The gateway allows users to record their incoming call greeting messages, when calling
via FXO.
After entering IVR mode, dial 132. After hearing "Enter value", record the incoming call
greeting message. To end recording, simply hang up.
After recording, to listen to the recorded message, press 131. Press 133 to save the
message.
the dial tone. When you hear a second dial tone, the system is in IVR mode,
you can continue with more settings or queries: enter 111
enter 192*168*1*2 (IP number).
enter 101 (to query IP address)
8
the
Advertisement
Table of Contents
