Table of Contents
Advertisement
Network Settings (LAN)
Network Settings (LAN): Gateway LAN Port IP address and the subnet mask value.
Please note that Gateway is built under NAT: Gateway LAN Port IP address cannot be
in the same section as the NAT LAN Port IP address, or else it is unable to make or
receive calls. For example, if the NAT LAN Port IP address is 192.168.8.1, then
Gateway LAN Port cannot be ranged between 192.168.8.1 ~ 192.168.8.254. If so,
please change the LAN port IP address, (e.g. setting the IP address to 192.168.99.254.)
Port of Web Access from WAN: Http port for WAN. To make this setting, the LAN Port
must be used. Settings cannot be made using the WAN Port. Always use port 80 when
connecting to LAN port.
QoS Settings
QoS (Quality of Service): Sets an external bandwidth to ensure sound quality during
transmission (When this function is enabled, the voice packet has the highest priority to
ensure telecommunication quality while less bandwidth is assigned for data
transmission).
ToS/DiffServ (Type of Service/DSCP): The voice packet has the highest priority to
ensure telecommunication quality; the larger the value you set, the higher priority you
will get.
19
Advertisement
Table of Contents
