PaceMaster Gold Indoor Cycle Owner's Manual page 8

1. Assemble the Front Stabilizer
STEP 1:
As shown to the Right, attach the Front Stabilizer
(6) to the Frame (1) with Bolts (3), Washers (4)
and Acorn Nuts (5), then tighten the nut (5) with a
13mm wrench.
Note: The front Stabilizer (6) is the one that
has the WHEELS ON IT, AND the wheels MUST
be towards the front.
2. Assemble the Rear Stabilizer
STEP 2:
As shown to the Right, attach the Rear Stabilizer
(2) to the Frame (1) with Bolts (3), Washers (4)
and Acorn Nuts (5), then tighten the nut (5) with
a 13mm wrench.
Step 1
Step 2
8