Economy Operation; Filter Reset - AirStage UTY-LNH series Operating Manual

ECONOMY OPERATION

Begin Air Conditioner operation before performing this procedure.
To Use the ECONOMY Operation
Press the "ECONOMY" button.
"ECO" appears on the Remote Control Unit display.
Economy operation begins.
To Stop the ECONOMY Operation
Press the "ECONOMY" button again.
"ECO" disappears from the Remote Control Unit display.
Normal operation begins.
About ECONOMY Operation
Economy operation can be set by remote controller.
The temperature setting is offset automatically over a certain period of time.
Based on temperature set in remote control unit, temperature of indoor unit varies little by little. However in this case, temperature
indication of remote control unit does not vary as it continues to indicate the temperature when ECONOMY Operation was set.
Save temperature
Cooling set temperature
Heating set temperature
Save temperature

FILTER RESET

When cleaning the air fi lter of the indoor unit, reset the display that indicates the schedule for fi lter cleaning.
To Use the FILTER RESET Operation
Press the "FILTER RESET" button.
En-9
°C
Cooling
2
Operation
1
0
0
1
Heating
Operation
2
3
4
0 30 60 90
ECONOMY operation
Start
Min.