MANUEL D’INSTALLATION TÉLÉCOMMANDE SIMPLE Pour le personnel d’entretien autorisé uniquement. MANUAL DE INSTALACIÓN MANDO A DISTANCIA SIMPLE Únicamente para personal de servicio autorizado. UTY-RHKY MANUALE DI INSTALLAZIONE UTY-RHKG TELECOMANDO SEMPLICE UTY-RHKYT A uso esclusivo del personale tecnico autorizzato. ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ...
INSTALLATION MANUAL This mark indicates procedures which, if CAUTION improperly performed, might possibly result in PART NO. 9371068084-08 personal harm to the user or damage to property. SIMPLE REMOTE CONTROLLER Do not touch the switches with sharp objects. It will cause injury, trouble, or electrical shock.
4.2. Name of parts CAUTION Do not set the DIP switch of this unit except as specifi ed in this manual or the operating manual supplied with the air conditioner. Setting the Display panel switches other than specifi ed will cause an accident or trouble. Use an insulated screwdriver to set the DIP switches.
Fig. 1 5.2. Setting the DIP switch 3. COM (Black) Set the remote controller DIP switches. (Fig. 1) 2. Signal (White) Fig. 1 1. 12V (Red) Unit : mm 1. 12V (Red) 2. Signal (White) Hole 3. COM (Black) Cable tie* Tightening torque 0.8 to 1.2N •...
5.3.2. Check whether the indoor unit terminal block or Note: The DIP switch, exclusive terminal block, and connector layouts depends on the type of indoor unit. For details, see the indoor unit connectors are either type A or type B as described below. installation manuals.
8. ADDRESS SETTING 6.2. Dual remote control • 2 remote controllers can be used to operate the indoor units. Address setting method of indoor unit can be selected from 3 options (outdoor • The timer cannot be used on the slave units. unit, indoor unit and remote controller).
Completion of address setting mode (5) Fix the Indoor unit address data by pressing the “ ” button. (Data is transferred to the indoor unit). (9) Address setting mode is released and returns to normal display if the “ ” button, “ ”...
Function number and setting number setting 10. TEST RUN E T H O D S (3) “Function number” indicator blinks. Then display Number by pressing This unit does not activate the test run. Test run can be activated by the the “...