Page 1
UNITÀ DI CONTROLLO SENZA FILI Conservare questo manuale per consultazione futura. ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ ΑΣΥΡΜΑΤΟ ΤΗΛΕΧΕΙΡΙΣΤΗΡΙΟ Διατηρήστε το παρόν εγχειρίδιο για μελλοντική αναφορά. UTY-LNHY UTY-LNHG MANUAL DE FUNCIONAMENTO CONTROLO REMOTO SEM FIOS Guarde este manual para consulta futura. РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ БЕСПРОВОДНОЙ ПУЛЬТ ДИСТАНЦИОННОГО УПРАВЛЕНИЯ...
OPERATING MANUAL Do not use fi re near this unit or place a heating apparatus nearby. PART NO. 9379143004-08 It may cause malfunction. WIRELESS REMOTE CONTROLLER Do not expose this unit directly to water. Doing so will cause trouble, electric shock, or heating. CONTENTS Do not set fl...
NAME OF PARTS PREPARATION Remote control unit Load Batteries (AAA/LR03/R03 x 2) 1 “MODE” button Display 2 “ECONOMY” button Press and slide the battery compartment 3 “ SET TEMP. / SET lid on the reverse side to open it. TEMP. ”...
CAUTION To Set the Fan Speed Incorrect use of batteries can cause liquid leakage, explosion or heating Press the “FAN” button. and may result in malfunction or personal injury. Adhere to the following. ● Do not recharge the batteries. Each time the button is pressed, the fan ●...
Use the “TIMER / TIMER ” button to About Mode Operation adjust the desired OFF time or ON time. Heating: Set the time while the time display is fl ashing (the fl ashing ● Use to warm your room. will continue for about 5 seconds). ●...
During Heating operation (Indoor unit): To Change Operating Conditions SLEEP timer setting When the SLEEP timer is set, If you wish to change operating conditions (Mode, Fan Speed, Tempera- 1 °C 2 °C the temperature setting is auto- 3 °C 4 °C ture Setting), after making the timer setting wait until the entire display matically lowered 1 °C every 30...
Cooling set temperature Press the “MODE” button again to return Save temperature to the clock display. The signal code will °C be changed. Cooling Operation If no buttons are pressed within 30 seconds after the signal code is displayed, the system returns to the original clock display. In this case, start again from step 1.
Page 8
About Mode Operation * Microcomputer-controlled Automatic *Heating: Defrosting ● Use to warm your room. ● When Heating mode is selected, the air conditioner will ● When using the Heating mode under conditions of low outdoor operate at very low fan speed for about 3 to 5 minutes, after temperature and high humidity, frost may form on the outdoor which it will switch to the selected fan setting.
TROUBLESHOOTING Water is produced from the outdoor unit: *● During Heating operation, water may be produced from the outdoor unit due to the Automatic Defrosting operation. (See Instructions relating to heating (*) are applicable only to page 7) “HEAT PUMP MODEL”. Instructions relating to heating (*) are applicable only to WARNING “HEAT PUMP MODEL”.
Page 10
AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
Need help?
Do you have a question about the UTY-LNHG and is the answer not in the manual?
Questions and answers