Speaker - HP Compaq 325 Maintenance And Service Manual

Speaker

The spare part number for the speaker used in all models is 605792-001.
Before removing the speaker, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the palm rest (see
7. Remove the keyboard (see
8. Remove the top cover (see
Remove the speaker:
1. Disconnect the speaker cable from the connector (1) on the system board.
2. Remove the two screws from the speaker (2).
3. Lift the speaker up (3), and then release the cable from the cable retainers (4).
4. Remove the speaker and cable from the base enclosure.
Reverse this procedure to install the speaker.
Battery on page 51).
Service door on page
Palm rest on page 70).
Keyboard on page 73).
Top cover on page 77).
52).
Component replacement procedures
87