4.
Remove the battery (see
5.
Remove the service door (see
Remove the hard drive from a 39.6-cm (15.6-in) computer:
1.
Position the computer right-side up with the front toward you.
2.
Remove the two Phillips PM2.5×6.0 screws (1) and loosen the Phillips PM2.5×11.0 captive screw
(2) that secure the hard drive to the computer.
3.
Grasp the mylar tab on the hard drive and slide the hard drive (3) to the left to disconnect it from
the system board.
4.
Remove the hard drive (4) from the hard drive bay.
Remove the hard drive from a 35.6-cm (14-in) or 33.8-cm (13.3-in) computer:
1.
Position the computer right-side up with the front toward you.
2.
Remove the two Phillips PM2.5×6.0 screws (1) and loosen the Phillips PM2.5×4.0 captive screw
(2) that secure the hard drive to the computer.
3.
Grasp the mylar tab on the hard drive and slide the hard drive (3) to the left to disconnect it from
the system board.
Battery on page
51).
Service door on page
52).
Component replacement procedures
55