Audio Board - HP Compaq 325 Maintenance And Service Manual

Audio board

Description
Audio board
Audio board for use on system boards with UMA graphics subsystem
Before removing the audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the hard drive (see
7. Remove the optical drive (see
8. Remove the fan (see
9. Remove the palm rest (see
10. Remove the keyboard (see
11. Remove the top cover (see
12. Remove the system board
Remove the audio board from 39.6-cm (15.6-in) computers:
1. Position the computer right-side up with the front toward you.
106 Chapter 4 Removal and replacement procedures
Battery on page 51).
Service door on page
Hard drive on page
Optical drive on page
Fan on page 65).
Palm rest on page
Keyboard on page
Top cover on page
(seeSystem board on page
52).
54).
63).
70).
73).
77).
96).
Spare part numbers
620608-001
622614-001