Disposal; Warranty - Hilti DX460 Operating Instructions Manual

10. Disposal

Most of the materials from which Hilti power actuated tools are manufactured can be recycled. The materials
must be correctly separated before they can be recycled. In many countries, Hilti has already made arrange-
ments for taking back your old powder actuated tools for recycling. Please ask your Hilti customer service
department or Hilti sales representative for further information.
Should you wish to return the power actuated tool yourself to a disposal facility for recycling, proceed as fol-
lows: Dismantle the tools as far as possible without the need for special tools.
Separate the individual parts as follows:
Part / assembly
Toolbox
Outer casing
Screws, small parts
Used cartridge strip

11. Warranty

Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, all warranty claims are made
within 5 years for the tool and 1 year for the fastener
magazine and fastener guide from the date of the sale
(invoice date), and the technical system is maintained.
This means that only original Hilti consumables, com-
ponents and spare parts, or other products of equiva-
lent quality, may be used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only. Parts requiring repair
or replacement as a result of normal wear and tear are
not covered by this warranty.
Additional claims are excluded, unless stringent nation-
al rules prohibit such exclusion. In particular, Hilti is
not obligated for direct, indirect, incidental or conse-
quential damages, losses or expenses in connection
with, or by reason of, the use of, or inability to use the
tool for any purpose. Implied warranties of mer-
chantability or fitness for a particular purpose are
specifically excluded.
For repair or replacement, send tool and/or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organisation provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.
Main material
Plastic
Plastic / synthetic rubber Plastics recycling
Steel
Plastic / steel
Confirmation of CIP testing
The Hilti DX 460 has been system and type tested. As a
result, the tool bears the PTB approval mark of square
shape showing approval number S 812. In this way, Hilti
guarantees compliance with the approved type.
Unacceptable/inadmissible defects, deficiencies, etc.
that are determined during use of the tool must be report-
ed to the manager responsible at the approval authori-
ty (PTB) and to the Office of the Permanent International
Commission (C.I.P.).
Recycling
Plastics recycling
Scrap metal
According to local regulations
31