Disposal; Manufacturer's Warranty - Tools; Ec Declaration Of Conformity (Original) - Hilti BX 3-ME Operating Instructions Manual

Fault
The fastener guide is jammed in
the pressed-in state.

9 Disposal

Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information.
For EC countries only
Disposal of electric tools together with household waste is not permissible.
In observance of the European Directive on waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electrical appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.

10 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.

11 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, 2006/66/EC, 2011/65/EU, until 19th April
2016: 2004/108/EC, from 20th April 2016: 2014/30/EU,
EN ISO 12100, EN 60745‑1, EN 60745‑2‑16.
Possible cause
Dirt between the fastener guide and
the nosepiece.
Battery-actuated fasten-
ing tool
BX 3-ME/BX 3-IF
01
2014
Remedy
Remove the fastener guide, clean the
fastener guide and inside surfaces
of the nosepiece and then refit the
fastener guide.
See section: 6.6 Removing/inserting
the fastener guide
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Norbert Wohlwend
Head of Quality & Processes Manage-
ment
BU Direct Fastening
11/2015
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
en
Lars Taenzer
Head of BU Direct Fastening
BU Direct Fastening
11/2015
23