Maintenance Intervals - Bosch FCS-320-TM Operation Manual

FCS-320-TM Aspirating Smoke Detector
Proceed in accordance with Section 6.5 Checking malfunction transmission, page 79.
7.12

Maintenance Intervals

Maintenance comprises regular inspections and maintenance routines. The smoke aspiration
systems should be checked when commissioned and then quarterly. At each fourth check,
more comprehensive checks should be made, as described below:
–
–
Inspection
Measure
visual check
Detection Unit and Alarm Transfer
Check the pipe system
Checking the Airflow Sensor Calibration
Checking malfunction transmission
Empty water separator (if necessary)
Maintenance and 4th annual inspection
Measure
visual check
Detection Unit and Alarm Transfer
Check the pipe system
Checking the Airflow Sensor Calibration
Checking malfunction transmission
Empty water separator (if necessary)
Bosch Sicherheitssysteme GmbH
Quarterly test/inspection
Annual test/maintenance + 4th annual inspection
Operation Guide
Further information can be found in...
Section 7.1 visual check, page 86
Section 7.2 Detection Unit and Alarm Transfer,
page 86
Section 7.3 Pipe System, page 86
Section 7.8 Checking the Airflow Sensor
Calibration, page 91
Section 7.11 Malfunction Transmission, page 92
Section 5.8 water separator, page 74
Further information can be found in...
Section 7.1 visual check, page 86
Section 7.2 Detection Unit and Alarm Transfer,
page 86
Section 7.3 Pipe System, page 86
Section 7.8 Checking the Airflow Sensor
Calibration, page 91
Section 7.11 Malfunction Transmission, page 92
Section 5.8 water separator, page 74
F.01U.130.928 | 1.0 | 2009.11
Maintenance | en 93