Note:
The contents of the above message are the same, regardless of whether you
enter EDS-1 or EDS-2. The asterisks indicate the current EDS Mode switch
settings for all the banks in both sub-modes.
Selecting a bank
While in the EDS Modes (EDS-1 or EDS-2), use the control panel's BANK
button to select a bank. While the BANK indicator is flashing, the lit
indicator indicates the currently selected bank.
Lit Indicator
Note:
EDS-2 has only three banks, so pressing the BANK button cycles through banks
A, B, and C only. Indicators D4, E5, and F6 do not light with EDS-2.
Selected Bank
A1
B2
C3
D4
E5
F6
A
B
C
D
E
F
Selecting a bank
29