Star LC-8521 User Manual page 48

40
Switch 2: Parity Check
This switch specifies whether or not a parity check should be performed on the
data.
Parity Check
Disabled
Enabled
Switch 3: Parity
This switch specifies the parity as non, odd, or even.
Parity
Even
Switch 4: Protocol
Protocol, which is sometimes referred to as "handshaking," is the
communications convention that is used to allow the printer and computer to
regulated the flow of data. DTR is the most commonly used protocol.
Protocol
XON/XOFF
Switch 5, 6: Not used
Odd
DTR
SW2 DOS/Windows Setting
ON
OFF
SW3 DOS/Windows Setting
ON
OFF
SW4 DOS/Windows Setting
ON
OFF
Disabled
Enabled
O
E
DTR
XON/XOFF