Table of Contents
Advertisement
Settings
On-screen Display Menus
How to operate menu
Operation steps
J
1 )
Press <MENU> button on the remote control or on the control panel.
Main Menu displays.
z
2 )
Use ▲▼ to select any item in the Main Menu.
The selected item is highlighted in orange.
z
3 )
Press
►.
Items in the Sub Menu can be selected.
z
4 )
Use ▲▼ to select any item in the Sub Menu.
The selected item is highlighted in yellow.
z
5 )
Press
► to display adjusting box.
6 )
Use ▲▼ to switch or adjust all settings.
7 )
Press <MENU> button to go back to the Sub Menu and press again to go back to the
Main Menu, press <MENU> button once more to close the Main Menu.
Main Menu
Note
Some items may not be adjusted or used for certain signal formats input to the projector. The MENU items that cannot be
z
adjusted or used are shown in gray characters, and they cannot be selected.
Some items can be adjusted even if signals are not input.
z
If there is no operation to the projector for about 30 seconds, the Menu screen and the adjusting screen will disappear
z
automatically.
See pages 34 and 35 for details on the items of Sub Menu.
z
Sub Menu
On-screen Display Menus
Setting Value
or
Adjusting Value
33
ENGLISH -
Advertisement
Table of Contents
