Position; Digital Zoom; Keystone; Ceiling Mount - Panasonic PT-CW33OE Operating Instructions Manual

V Position
Shift the projected image position vertically.
1 ) Press ▲▼ to select [V Position].
2 ) Press ► to display the adjustment
dialog box.
3 ) Press ◄► to adjust the level.
Note
During Computer input signal, [V Position] can be
z
adjusted.

Digital Zoom

Adjust the magnification of the image. Magnification
can be set from 1.0x to 2.0x in 0.1 increments.
1 ) Press ▲▼ to select [Digital Zoom].
2 ) Press ► to display the adjustment
dialog box.
3 ) Press ◄► to adjust the level.
Note
When the [Digital Zoom] is in the enlarge status, exits the
z
menu screen and the [Zoom] picture will display at the
bottom left of the screen. This indicates the zoom
function is in use.
Under the enlarge status, press ▲▼◄► to move the
z
enlarged image.
If the input signal is changed under the enlarge status,
z
the magnification of [Digital Zoom] will be reset.
V Keystone
This function is used to adjust keystone distortion of
the projected image.
1 ) Press ▲▼ to select [V Keystone].
2 ) Press ► to display the adjustment
dialog box.
3 ) Press ◄► to adjust the level.
Use the <KEYSTONE+/-> (▲▼) buttons on the
z
remote control to adjust.
Operation
Press the ▲► on
the remote control
or the ► on the
control panel to
adjust the upper of
the keystone.
Screen image
Press the ▼◄ on
the remote control
or the ◄ on the
control panel to
adjust the bottom of
the keystone.
Note
The adjusted keystone distortion will store automatically
z
even when the signal is interrupted or the AC power cord
is plugged out or turned off the projector.
When the larger amount of keystone correction, the
z
picture quality will degrade and it will get harder to focus
with more correction. Set the projector so the correction
will be as small as possible.
When keystone correction is performed, the screen size
z
will also change.
Part of Closed caption may not be displayed when high
z
compensation values are set in [V Keystone].

Ceiling Mount

This function is used to project the image from a
ceiling-mounted projector.
1 ) Press ▲▼ to select [Ceiling Mount].
2 ) Press ► to display the choosing dialog
box.
3 ) Press ◄► to select the desired item.
When setting on a desk/floor and
Front
projecting from forward.
Front When mounting on the ceiling and
Ceiling projecting forward.
When setting on a desk/floor and
Rear projecting rear (Using translucent
screen).
When mounting on the ceiling and
Rear
projecting from rear (Using translucent
Ceiling
screen).

Position

39
ENGLISH -