Table of Contents
Advertisement
3D
Select [3D] from the Main Menu (see "How to
operate menu" on page 33) and then select the
item from the Sub Menu.
3D
Use this function to set the display mode of the 3D
image.
1 )
Press ▲▼ to select [3D].
2 )
Press ► to display the setting dialog
box.
3 )
Press ◄► to switch.
When 3D signal is input under
HDMI input, it will automatically
detect and display the 3D format of
Auto
video signal.
When a 2D signal or other signal
except HDMI is input, it will display
the image in 2D.
Select [On] when the 3D image
signals are 3D format information
excluding RGB signal or Video
On
signal.
Compulsory displays the 3D format
which is selected in [3D Format].
Turn off [3D] image display. When
[Off] is selected and 3D signal is
Off
input, some image may not appear
correctly.
Note
Compatible 3D source, 3D content and active shutter
z
eyewear are required for 3D viewing.
When [3D] is set to [On], [Picture] menu will change to
z
3D settings in spite of the input image signal, and [Color
Mode] or [Color Temp] can not be adjusted.
Even if the signal is input to <HDMI IN> terminal, when
z
the signal does not have 3D video format, the 3D video
is not displayed correctly when [3D] menu is set to [Auto].
In this case, set [3D] menu to [On] and then select the
desired 3D video format in [3D Format] menu.
If the screen is flickering abnormally, set [3D] menu to
z
[Auto] and also check the [3D Format] settings.
Attention
When viewing 3D contents, see detail cations about
z
[VIEWING 3D IMAGES] (
Æ
3D Invert
Flips the timing of the switch between the left and
right of an image to display. Change the setting if the
3D images you see appear strange.
1 )
Press ▲▼ to select [3D Invert].
2 )
Press ► to display the setting dialog box.
3 )
Press ◄► to switch [On]/[Off].
If the 3D images are displayed
Off
correctly, do not change the [Off]
settings.
Select when left and right 3D
On
images are swapped to be
displayed.
3D Format
When [3D] is set to [On], it will compulsorily display
the 3D setting mode.
1 )
Press ▲▼ to select [3D Format].
2 )
Press ► to display the setting dialog
box.
3 )
Press ▲▼ to select the desired 3D
Format item.
4 )
Press ► to execute.
Displays the Frame Packing 3D
Frame
image in spite of the input signal
Packing
format.
Displays the Side-by-Side(Half) 3D
Side-by-
image in spite of the input signal
Side(Half)
format.
Displays the Top and Bottom 3D
Top and
image in spite of the input signal
Bottom
format.
Displays the Frame Sequential 3D
Frame
image in spite of the input signal
Sequential
format.
Displays the Field Sequential 3D
Field
image in spite of the input signal
Sequential
format.
3D
page 6).
ENGLISH -
45
Advertisement
Table of Contents
