Listening to the radio
Press the ON/STAND-BY button to turn the power on.
Press the FUNC. button repeatedly to select the Tuner
Tune to the desired station.
Press the TUNING (
When the TUNING (
than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
) button to tune into the
) button is pressed for more
■ Programming a station
You can store 40 FM stations in memory.
Perform steps 1 - 3 "Tuning" on page 11.
Press the CLOCK/MEM. button for more than 2
seconds to enter the preset tuning saving mode.
Within 30 seconds, press the
select the preset channel number.
Store the stations in memory, in order, starting with preset
Within 30 seconds, press the CLOCK/MEM. button to
store that station in memory.
If the preset number indicators disappear before the
station is programmed, repeat the operation from step 2.
Repeat steps 1 - 4 to set other stations, or to change
a preset station.
When a new station is stored in memory, the station
previously programmed for that preset channel number
will be erased.