Setting The Time And Date - Sharp DK-CL8PHBK Operation Manual

Setting the time and date

TUNING
In this example, the clock is set for the 12-H (12 hour) display.
1
In standby mode, press the CLOCK/MEM. button for
more than 3 seconds. The clock time display format
will blinking. Press the (
H or 24-H for clock time display format, then press
CLOCK/MEM. to confirm.
PLAY/PAUSE
or ) button to select 12-
2
Press the ( or ) button to adjust the hour and then
press the CLOCK/MEM. button.
PM
Press the ( or ) button once to advance the time by 1
hour. Hold it down to advance continuously.
"AM" or "PM" indicator will interchange after each 12 hour
cyclic.
3
Press the ( or ) button to adjust the minutes and
then press the CLOCK/MEM. button.
PM
Press the ( or ) button once to advance the time by
1 minute. Hold it down to advance continuously.
4
Press the ( or ) button to adjust the day and then
press the CLOCK/MEM. button.
PM
":" will be blinking to indicate time and date setting is
completed.
SUN
DK-CL8PH
ENGLISH
E-8