Table of Contents
Advertisement
DataMatrix Inverse
Parameter # F1h 4Ch
This parameter sets the DataMatrix inverse decoder setting. Options are:
•
- the scanner decodes regular DataMatrix bar codes only.
Regular Only
•
- the scanner decodes inverse DataMatrix bar codes only.
Inverse Only
•
Inverse Autodetect
NOTE If you enable
selected. When you disable DPM Scanning, the previous (user-selected) DataMatrix Inverse setting
remains in effect.
*Regular
(00h)
Inverse Autodetect
(02h)
- the scanner decodes both regular and inverse DataMatrix bar codes.
DPM Scanning on page
5-5, the scanner behaves as if the Inverse Autodetect setting is
Symbologies 13 - 69
Inverse Only
(01h)
Advertisement
Table of Contents
