Chapter 4 Configuring The Ai5Tt - TMC AI5TT User Manual

Chapter 4 Configuring the AI5TT

The following sections describe the necessary procedures and proper
jumper settings to configure the AI5TT motherboard.
4.1 SW1 (1-4), JP3, JP1: CPU Frequency Selector................... 13
4.2 SW2 (1-4): CPU Voltage Selector....................................... 16
4.3 JP5: Clear CMOS Content................................................... 18
For the locations of the jumpers, refer to Figure 2 on the following page.
The following shows the conventions used in this chapter.
off off on on
AI5TT Pentium Baby AT Motherboard User's Manual
Chapter 4 Configuring the AI5TT
Jumper open
Jumper closed (short)
Switch 1 and switch 2 are set to OFF.
Switch 3 and switch 4 are set to ON.
11