Chapter 4 Configuring The Ai5Tt - TMC AI5TT User Manual

Chapter 4 Configuring the AI5TT

Chapter 4 Configuring the AI5TT
The following sections describe the necessary procedures and proper
jumper settings to configure the AI5TT motherboard.
4.1 SW1 (1-4), JP16, JP17: CPU Frequency Selector.................. 14
4.2 SW1 (5-8): CPU Voltage Selector ........................................ 17
4.3 JP19: Clear CMOS Content.................................................. 19
4.4 J15: External Battery Connector........................................... 19
For the locations of the jumpers, refer to Figure 2 on the following
page.
The following shows the conventions used in this chapter.
off off on on
12
Jumper open
Jumper closed (short)
Switch 1 and switch 2 are set to OFF.
Switch 3 and switch 4 are set to ON.
AI5TT Pentium Baby AT Motherboard User's Manual