StarTech.com DVI2VGACON Instruction Manual

High resolution dvi to vga video converter

Instruction Manual

High Resolution DVI to VGA Video Converter

DVI2VGACON

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Packaging Contents

• 1 x Video Format Converter

• 1 x DVI-D video cable

• 1 x USB to DC Power adapter cable

• 1 x Installation Guide

• DVI-D video source

• VGA enabled monitor/display

1. Connect the included DVI-D cable from the video output on the source device to the DVI input on the DVI2VGACON.

2. Connect a VGA cable (not included) from the VGA output on the DVI2VGACON, to the VGA input on your monitor/display.

3. Connect the USB to DC power adapter cable from the computer system to the DVI2VGACON.

4. Power on the display and then the source device. The LED on the unit should light up to indicate it is receiving a signal.

For the most up-to-date information, please visit: www.startech.com

*actual product may vary from photos

Manual Revision: 01/25/2012

Table of Contents

Do you have a question about the DVI2VGACON and is the answer not in the manual?

Page 1: Packaging Contents
Installation 1. Connect the included DVI-D cable from the video output on the source device to the DVI input on the DVI2VGACON. 2. Connect a VGA cable (not included) from the VGA output on the DVI2VGACON, to the VGA input on your monitor/display.
Page 2: Specifications
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and...