Description Of Components; Before Use - Binatone SI-4016 Instruction Manual

Hide thumbs Also See for SI-4016:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
Steam Iron SI 4016, 4020, 4220
Please read the safety instructions carefully before using this
appliance. Please retain the instructions for future refer-
ence.
DESCRIPTION OF
COMPONENTS
1. Casing
2. Handle
3. Water inlet opening
4. Water tank cover
5. Water tank with maximum limit mark
6. Self clean button
7. Spray button
8. Burst of steam button (turbo steam, burst of steam in a vertical
position)
9. Steam control knob
10.Temperature control knob
11.Operation indicator (only for SI-4220)
12.Temperature indicator
13.Iron sole plate
14.Measuring jug

BEFORE USE

Remove all packaging from the appliance.
Turn the steam control knob (9) into the
"0" position, and the temperature control knob
(10) – into the "Min" position.
If you intend to iron with spray or steam,
push the cover (4) up and fill the tank (5) with
water through the opening (3). Use the mea-
suring jug (14) for convenience and ease.
Note: if your area has hard water, we recommend you use
filtered or bottled water.
Attention: always disconnect the iron from the electricity
mains supply prior to filling the tank (5). Do not
overfill the tank (see the "Max" mark on the tank
(5). Do not fill the tank (5) with other liquids.
Prior to first use iron a clean old piece of cotton cloth to make
sure the sole plate and the water tank are absolutely clean
(see subsection "Steam ironing").
Note: light smoke may emit during the first use of the
appliance: it is a normal occurrence that will soon
disappear.
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Si-4020Si-4022

Table of Contents