Checking The Tyre Pressure; Replacement Of Fuel Filter - Husqvarna 1030 BioClip Operator's Manual

Checking the tyre pressure

The tyre pressure should be 60 kPa (0.6 kp/cm
all round.
To improve driving the pressure on the rear tyres
can be reduced to 40 kPa (0.4 kp/cm
The maximum tyre pressure is 100 kPa (1.0 kp/cm
IMPORTANT INFORMATION
Different tyre pressures on the front tyres
will result in the blades cutting the grass at
different heights.
Replacement of the fuel filter
Replace the fuel filter every 100 running hours
(once per season) or more frequently if it is clogged.
Replace the filter as follows:
1. Dismantle the engine hood as described on page
18.
2. Move the hose clips away from the filter. Use a
pair of flat pliers.
3. Pull off the filter from the hose ends.
4. Press in the new filter on the hose ends. If
necessary soap solution can be applied on the
filter ends to simplify fitting.
5. Push the hose clips back on the filter and
tighten.
30
– English
MAINTENANCE
2
)
2
).
2 ).