Lever For Adjustment Of Cutting Height; Parking Brake; Seat; Fuelling - Husqvarna 1030 BioClip Operator's Manual

Lever for adjustment of the cutting
height
The cutting height can be adjusted to 7 different
positions with the cutting height lever.
To achieve an even cutting height it is important that
the tyre pressures are the same on the front wheels
(60 kPa).

Parking brake

The parking brake is applied as follows:
1. Push down the brake pedal.
2. Push in the lock button on the steering column.
3. Release the brake pedal while holding the button
pressed.
The parking brake lock disengages automatically
when the brake pedal is pressed.

Seat

The seat has a jointed attachment on the front edge
and can be tipped forward.
The seat can also be adjusted lengthways.
To adjust move the lever under the front edge of the
seat to the left, so that the seat can be moved
forward or backwards to the required position.

Fuelling

The engine should be run on at least 92 octane
leaded or unleaded petrol (not oil mixed). For USA
and Canada at least 87 octane leaded or unleaded
petrol (not oil mixed).
!
WARNING!
Petrol is highly inflammable. Observe
care and fuel outdoors (see safety
instructions).
12
– English
PRESENTATION