Keystrip Labels; Ring Tones - Toshiba Strata CIX DP-5000 series User Manual

Keystrip Labels

Available on 9 Line LCD telephone and 10 Button LCD Add-on Module

To program LCD Keystrip Labels
#9876
1. Dial
2. Press the
3. Press the button you wish to label.
4. Use the dialpad to enter the label.
5. Press the button labeled in step 3 to save the setting.
6. To label another button, repeat steps 3-5.
7. To exit User Programming mode lift the handset off-hook / on-hook.

Ring Tones


To set distinctive ringing
#9876
1. Press
Line
2. Press a
3. You can press
station calls within your system; external = outside line calls.)
4. Enter the two-digit pitch number (see
5. Press the same button that you pressed in Step 2 (
a confirmation tone and "DATA PROGRAMMED" displays on your LCD.
6. Lift the handset off-hook/on-hook to save settings.
Strata CIX DP5000-series Telephone User Guide
(or press the flexible
button.
to enter User Programming Mode.
or extension button. The LED is steady green.
to switch between internal and external pitch. (Internal =
Program
button)
Table 5 on page
Line
The Basics
Keystrip Labels
16).
or extension). Two beeps is
15