Keystrip Labels
Available on 9 Line LCD telephone and 10 Button LCD Add-on Module
To program LCD Keystrip Labels
#9876
1. Dial
2. Press the
3. Press the button you wish to label.
4. Use the dialpad to enter the label.
5. Press the button labeled in step 3 to save the setting.
6. To label another button, repeat steps 3-5.
7. To exit User Programming mode lift the handset off-hook / on-hook.
Ring Tones
To set distinctive ringing
#9876
1. Press
Line
2. Press a
3. You can press
station calls within your system; external = outside line calls.)
4. Enter the two-digit pitch number (see
5. Press the same button that you pressed in Step 2 (
a confirmation tone and "DATA PROGRAMMED" displays on your LCD.
6. Lift the handset off-hook/on-hook to save settings.
Strata CIX DP5000-series Telephone UG
(or press the flexible
Speaker
button.
to enter User Programming Mode.
or extension button. The LED is steady green.
Hold
to switch between internal and external pitch. (Internal =
10/10
Program
button)
Table 5 on page
Line
Keystrip Labels
16).
or extension). Two beeps is
The Basics
15