Antenna Locations; Configuration Settings; Welcome Application - Nokia NAVIGATOR 6210 User Manual

G e t s t a r t e d
My Nokia
My Nokia is a free service that sends you tips, tricks, and
support for your Nokia device regularly as text messages.
If My Nokia is available in your country and supported by
your service provider, your device invites you to join the My
Nokia service after you have set the time and date.
Select the language for the service. If you change the
language, the device restarts. To sign-up to My Nokia,
select Accept and follow the instructions on the display.
To sign-up to My Nokia later, select

Antenna locations

• Cellular antenna (1)
• Bluetooth antenna (2)
• GPS antenna (3)
Your device may have internal and
external antennas. As with any radio
transmitting device, avoid touching the
antenna area unnecessarily while the
antenna is transmitting or receiving.
Contact with such an antenna affects
the communication quality and may
cause the device to operate at a higher
power level than otherwise needed and may reduce the
battery life.
4

Configuration settings

Before you can use multimedia messaging, push to talk,
e-mail, synchronisation, streaming, and the browser,
you must have the proper configuration settings on your
device. Your device may automatically configure browser,
multimedia messaging, access point, and streaming
settings based on the SIM card used. Otherwise, you can
use the
or you may receive the settings directly as a configuration
message, which you save to your device. For more
> Help > My Nokia.
information on availability, contact your service provider
or nearest authorised Nokia dealer.
When you receive a configuration message, and the
settings are not automatically saved and activated,
message
Options
provided by the service provider.

Welcome application

The
device for the first time. With the
you can access the following applications:
Sett. wizard
See
Copyright © 2008 Nokia. All rights reserved.
Sett. wizard application to configure the settings,
is displayed. To save the settings, select
> Save. You may need to enter a PIN code
Welcome application starts when you switch on your
— Configure connection settings.
"Settings wizard", p. 5.
1 new
Show >
Welcome application,