Send Data; Bluetooth Connection Settings - Nokia NAVIGATOR 6210 User Manual

Generic Audio/Video Distribution, Generic Access,
and Generic Object Exchange. To ensure interoperability
between other devices supporting Bluetooth technology,
use Nokia approved enhancements for this model.
Check with the manufacturers of other devices to
determine their compatibility with this device.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
Do not accept Bluetooth connections from sources you do
not trust.
A Bluetooth connection is disconnected automatically
after sending or receiving data.

Bluetooth connection settings

Select > Settings > Connectivity
Bluetooth — to switch Bluetooth connectivity on or off
My phone's visibility — to allow your device to be found by
other devices with Bluetooth connectivity at all times,
select Shown to all. To allow your device to be found for a
defined time period, select
reasons it is advisable to use the
possible.
> Bluetooth.
Define period. For security
Hidden setting whenever
Copyright © 2008 Nokia. All rights reserved.
My phone's name — to define a name for your device
Remote SIM mode — to enable another device, for example,
a car kit, to use the SIM card of your device using
Bluetooth technology (SIM access profile)
When the wireless device is in the remote SIM mode,
you can only use a compatible connected enhancement,
such as a car kit, to make or receive calls. Your wireless
device will not make any calls, except to the emergency
numbers programmed into your device, while in this mode.
To make calls from your device, you must first leave the
remote SIM mode. If the device has been locked, enter the
lock code to unlock it first.

Send data

1. Open the application where the item you want to send
is saved.
2. Scroll to the item you want to send, and select
Options > Send > Via Bluetooth.
3. The device starts to search for devices within range.
Paired devices are shown with
show only the unique device addresses. To find out the
unique address of your device, enter the code *#2820#
in the standby mode.
If you have searched for devices earlier, a list of devices
found previously is shown. To start a new search, select
More devices.
C o n n e c t i v i t y
. Some devices may
67