Gps Data - Nokia NAVIGATOR 6210 User Manual

GPS data

GPS data is designed to provide route guidance
information to a selected destination, position information
about your location, and travelling information, such as
the approximate distance and travel time to the
destination.
Route guidance
Start the route guidance outdoors. Select
Applications > GPS data > Navigation.
Route guidance shows the straightest route and the
shortest distance to the destination, measured in a straight
line. Any obstacles on the route, such as buildings and
natural obstacles, are ignored. Differences in altitude are
not taken into account when calculating the distance.
Route guidance is active only when you move.
To set your trip destination, select
destination and a landmark as the destination, or enter the
latitude and longitude coordinates. To clear the
destination, select Stop navigation.
>
Options > Set
Copyright © 2008 Nokia. All rights reserved.
Position
To save your location as a landmark, select
Applications > GPS data >
position.
Trip meter
To activate trip distance calculation, select
Applications > GPS data >
To deactivate it, select Options
values remain on the display.
To set the trip distance and time and average and
maximum speeds to zero, and to start a new calculation,
select Reset. To set the odometer and total time to zero,
select Restart.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
P o s i t i o n i n g
>
Position > Options > Save
>
Trip distance > Options > Start.
> Stop. The calculated
37