Maintenance; Cleaning; Batteries - Oakton Temp-360 Instruction Manual

Rtd data logging thermometer

Hide thumbs Also See for Temp-360:

Table of Contents

21. MAINTENANCE

Properly used, the thermometer

should maintain calibration indefinitely

and not require service other than

occasional cleaning of the housing and

changing of the batteries.

WARNING:

TO PREVENT IGNITION OF A

HAZARDOUS ATMOSPHERE BY

ELECTROSTATIC DISCHARGE,

CLEAN WITH DAMP CLOTH.

Do not clean with abrasives or

solvents. Use mild detergents, never

immerse nor use excessive fluid.

If there is no display when the

thermometer is turned on, check the

condition of the three AA batteries.

Also check that the battery terminals

are clean and batteries are properly

installed. If replacement is necessary,

refer to the BATTERY

INSTALLATION AND

REPLACEMENT section for the

replacement procedure.

- 29 -

Table of Contents