Installation Precautions - VisionDrive Black Box VD-9000FHD User Manual

Installation Precautions

For safe installation and operation, carefully read all the information stated
below.
DO NOT disconnect the power supply while the system is booting up.
Be aware of that engine ignition may disconnect the product for short periods of
time.
It is recommended using only authorized SD cards with the VisionDrive® products.
Install the product after parking your vehicle in a bright and safe area.
Install the system when ignition is off. Especially, after the power source has been turned off
completely.
Use the power cable provided with the product for the cigarette lighter power connection in the
range of DC12V to DC24V. If power wiring is involved, we recommend a professional service for
the installation.
Prior to the installation, clean the area of the installation where the camera will be positioned.
DO NOT eject the SD card while the product is in operation.
DO NOT disconnect the product before its complete off.
Do NOT attempt to modify, separate or repair the product yourself in any way.
8
visiondrive.co.kr