VisionDrive Black Box VD-9000FHD User Manual page 27

PC Analysis Program Use
Configuration
Video Setting
Shock Sensor Setting
-
Audio recording is selectable here but regardless of this setting, you can immediately change
the audio recording status by pushing the SHOT button on the main unit as described earlier
in this manual.
- Impact sound volume can be modified.
-
Each of the Sound Options can be configured: Event (Alarm) / Start up (Greeting) / Parking
Mode(Notice) to either enable or disable the sound. The volume of these announcements
is also configurable.
26
visiondrive.co.kr
- The video resolution and quality settings can be
modified.
- If the resolution is high, the file size also becomes
large and will spend more storage of the SD card.
- The sensor can be configured. If the number is
higher on the sensor, the sensor becomes less
sensitive.
- A setting of 10 will disable the Shock Sensor for
Event recording.
- You can set the recording time after an
impact. (10 seconds prior to the impact are
always recorded and stored.)
- Impact files are stored in the EVENT folder
and the size of the EVENT folder is defined
here too. The remaining % of the SD card
space is for the NORMAL folder.