Advertisement
Quick Links
Advertisement
Related Manuals for VisionDrive VD-3000
Summary of Contents for VisionDrive VD-3000
- Page 1 Ver 1.1 VD-3000 User Guide...
-
Page 2: Table Of Contents
INDEX 1. Before use/Caution Warranty and scope of responsibility Caution to use 2. Product structure 3. Product speci cations 4. Part names 5. Major features 6. Installation sequence and procedure Caution before installation Installation sequence Installation procedure 7. Usage Startup Features and operation Video recording How to eject a memory card... -
Page 3: Before Use/Caution
VD-3000 is designed to record, store, play and analyze the videos incurred by impacts and car accidents. Videos can be also recorded even at user’s discretion. However, it is not assured to record all videos in a speci c environment or operation situation. - Page 4 1. Before use/caution - This product shall be installed strictly inside a car following the informed procedure during installation. Impurities on the car windshield can weaken the adhesive strength and can damage the product if the product drops because of weak adhesion. - This product is not water-proof.
- Page 5 1. Before use/caution - Keep or carry SD cards in a safe keep box because static electricity or other environmental elements can damage the data of the product. - SD cards are expendable supplies. After a certain usage period, normal recording can not be implemented because partial memory sectors can be already damaged.
- Page 6 2. Product Structure -Vision Drive -Attach Bracket Holder -SD Card (VD Analyzer Software and User Manual PDF) -Power cable...
-
Page 7: Product Structure
2. Product Structure -Cable holder -SD Card reader (optional) -Multi cigar jack (optional) -Quick Install Guide... -
Page 8: Product Speci Cations
Event le is 25 sec or more (10 sec before a impact / 15~60 after a impact) Normal le is 5 minutes. -Function key: VIEW/PLAY/SHOT Contents in this manual can be modi ed without notice for more convenience and performance upgrade. The user can refer to the web site (www.visiondrive.co.kr) -
Page 9: Part Names
4. Part names REC LED GPS LED Microphone RESET VIEW button PLAY button LCD Screen: SHOT button it turns on while installing, car start-up, View/Play pressed. Built in GPS Camera Attached Bracket Power port External GPS port (if Ext GPS used) SD Card slot... -
Page 10: Major Features
5. Major features * Ordinary video record Recording automatically starts when the user starts up the car engine, booting the main system of the product. Recording and storing continue until the car engine stops. (Record time is di erent up to capacity of the storage media) * Recording accident videos Images shall immediately begin recording and stored from a certain time before the accident to a certain time after the accident since an impact sensor automatically senses the impact, if a car... -
Page 11: Installation Sequence And Procedure
6. Installation sequence and procedure 6-1) Caution before installation Check the cautions as follows before installation for safe installation and use. - Install the product in a bright and safe area. - Installation should be started after the car engine fully stops and car keys are ejected. - The power cable of the Vision Drive should be connected at the end of installation. - Page 12 6. Installation sequence and procedure 6-3) Installation - Fix the bracket to the Vision Drive groove and push it left to x (push the Vision Drive left to detach the Vision Drive only) - Insert an SD memory card as shown in the left photo after the connection of the Vision Drive to the bracket.
- Page 13 6. Installation sequence and procedure - Adjust the shot angle by moving the camera up and down. (Vision Drive’s LCD lights can be on for several minutes in case of power-on for safe driving. If the user needs longer checking time for LCD, turn on the LCD by pressing the VIEW button of the Vision Drive.
-
Page 14: Usage
7. Usage 7-1) Startup - Check if the car engine is turned o and keys are removed. - Check if an SD memory card is inserted in the Vision Drive. - Start up the car - Normal recording starts when LCD is on, voice guidance is released and record preview is temporarily shown through the LCD screen after startup. - Page 15 7. Usage 7-3) Video recording - This product’s system records video continuously after normal startup. Ordinary recorded les are stored as “Normal” les, saving the recent 5 minutes. - In case that a certain level of impact is given to the car while driving or stopping the impact sensor is triggered and video les are stored as “Impact”...
- Page 16 8. PC analysis program usage 8-1) PC analysis program preparation -Execute “VDAnalyer.exe” program copied in the SD card after the SD memory card is connected to PC. * An optional SD card reader (USB adaptor, SDHC compatible) shall be necessary in case there is no slot for SD cards (SD or SDHC) or PC does not support SD cards.
- Page 17 8. PC analysis program usage - A le name is displayed as NoGPS-XXXXXX-X if there is no date or time data because of bad GPS reception. - File selection: If a desired le on the list is clicked, the screen shot shall be shown in the center of window.
- Page 18 8. PC analysis program usage - Map Linked: A map to display the driven position is shown on the right bottom corner in case that PC is connected to the Internet. (A map can not be shown if GPS data reception was not good at the accident scene even if the PC is connected to Internet) - Screen size edit: Full screen size of display for 1280 * 960 videos is supported if “full screen”...
- Page 19 8. PC analysis program usage ③ Set the time length stored after impact. ④ Set the size of event les (and thus the size of normal le’s) partition to be stored. ⑤ Set to use audio recording or not (the default value is o ) ⑥...
- Page 20 9. Warranty service & Free after service (A/S) 9-1) Warranty service - Geo Cross Co., LTD., guarantees warranty service for our manufactured products according to consumer compensation regulations (the 2006-36 item, Ministry of strategy and nance declared) - Warranty service shall be provided by Geo Cross or designated partners on user’s request for warranty service for this product.
- Page 21 All rights regarding hardware, software, design, trademark and products are of the manufacturer. Illegal copy, process and distribution shall be restricted and shall be punished by law according to regulations of legal compensation for damage of intellectual property rights.