Voice Recording - VisionDrive Black Box VD-9000FHD User Manual

Product Use
Viewing
Viewing recorded videos on LCD -VIEW button works as noted below.
1. Main camera image shows when system starts.
2. Pressing the [V] button will turn the display off and the recorder will continue to record.
Press the [V] button again and the display will become active.
3. Another click on the [V] button starts the sequence from 1~2 again.
!! Note : Operate the system while the car is securely stopped for your safety.
Playback of the recorded videos on LCD
- PLAY button starts the playback of the latest video file.
- Which file you are working on is shown at the upper-right corner and percentage of
completion can be found as bar chart on the bottom.
- Date and time data are displayed on the bottom of LCD.
- [SHOT] button makes the videos played according to time sequence.
- Pressing the [PLAY] button for more than 3 seconds will make the system return to recording
mode followed by an announcement of current audio recording status.

Voice Recording

-
When the SHOT button is pressed and held for more than 3seconds, the voice notification will
announce that the voice recording has been enabled.
-
Hold the button down once more to disabled the voice recording. The voice recording stops
with an announcement that the voice recording is stopped.
-
The initial audio recording setting can be changed in the analysis program.
16
visiondrive.co.kr