VisionDrive Black Box VD-9000FHD User Manual page 5

Caution
If not enough light is available, using additional external lighting may help record
better images.
In case of slight impact, the product may not be able to create an event file automati-
cally (it is however recorded as a Normal file). In such a case, please use the (SHOT)
button to create an event file manually.
If you eject the SD card while the product is operating, the recorded data may be
damaged.
Ensure the main power is completely off and the device is fully powered off (no
indicator lights are on) before removing the SD card from the product.
Interacting with the product while driving is risky and may cause an accident. This
should only be performed when the vehicle is stationary and parked in a safe place.
Do not keep the product in extreme temperatures or in humid areas. Being under
extreme heat in summer days or freezing cold in winter days may result in defection
of the product. Also, do not expose the product to direct fire or water.
Do not disassemble the product as this may result in defect of the product which is
not covered by us.
Keep the SD card in its case when not in use for the product.. Static electricity or
other environmental elements can damage the recorded data.
SD cards are an expendable supply. After normal periods of use, partial memory
sectors may be damaged and will disable the recording of data.
The system installed on the SD card provides an automated checking function. If the
use of the automatic checking function identifies problems with the SD card, then we
recommend purchasing a new one for recording data.
If the SD card is ejected or the system is turned off while recording, copying or
deleting data, the stored data may be damaged or lost and/or the SD card may
become defective.
Manufacturer is not responsible for loss or destruction of stored data caused by
actions above.
Copy and keep important data on other data storages such as hard disk, CD or
portable flash memory.
4
visiondrive.co.kr