Honda ARX1200N2 2004 Owner's Manual page 66

Check these items which require starting and
flushing the engine on shore (see Flushing
Procedure, page 152. If necessary, these
procedures may be performed with your
PWC on calm water):
Insert the lock clip in the
Engine Start
engine stop switch.
& Stop
Push the start button after
ventilating the engine
compartment.
Stop the engine by pushing
the engine stop button. Start
the engine again and stop it
by removing the lock clip.
Check the water comes out
Engine
from the cooling water
Cooling
bypass outlet.
System
Is Your PWC Ready To Ride?
Engine Oil
Check the level and add oil if
needed (page 125).
Off-throttle
Check that the OTS
Steering activates properly (page
System (OTS)
157).
59
Before Riding