If a Fuse Blows
Circuit Fuse Access:
4. To check or replace a circuit fuse, pull the
old fuse out of its retaining clips. Look for
a burned wire inside the fuse. If the fuse is
blown (3), replace it with a spare fuse (5)
of the same rating or lower.
5. Install the fuse box cover.
6. Install the rear tray (page 114), rear cover
(page 113), and the seat (page 117).
If you do not have a spare fuse and you
cannot ride the PWC without fixing the
problem, take a fuse of the same rating or a
lower rating from one of the other circuits
that you can do without temporarily.
NOTICE
Replacing a fuse with one that has a higher
rating greatly increases the chance of
damage to the electrical system.
188
Taking Care of the Unexpected
ENGINE COMPARTMENT
(5) spare fuses
(5)