Honda ARX1200N2 2004 Owner's Manual page 31

Multi-function Display
10 ID No. button
11 ID SET button
12 multi-function meter
digital clock ( )
tachometer
time meter ( )
tripmeter ( )
hourmeter
If the battery is disconnected, the digital clock, tripmeter, and time meter will reset.
24
Instruments & Controls
Selects or changes the ID number (page 34).
Also used to switch the display to the set up
condition of the ID number (page 34).
Enters or cancels the ID number.
Also used to activate the ID lock system.
The meter includes the following functions:
Shows hour and minute (page 32).
Shows engine speed in revolutions per minute (rpm).
Shows the hours and minutes of engine operation
since you last reset the meter. To reset the time
meter to zero (0), press and hold the SET button.
Shows the number of miles ridden since you last
reset the meter. To reset the tripmeter to zero (0),
press and hold the SET button.
Shows the total hours of engine operation.
Check the hourmeter to determine when the next
scheduled maintenance is due.