7
PGM-FI malfunction indicator
lamp (MIL)
8
SET button
9
MODE button
Multi-function Display
Flashes when there is some abnormality in the
PGM-FI (Programmed Fuel Injection) system.
Occasionally, depending on the abnormality, engine
revs may be limited to less than 3,000 rpm. In
extreme cases, the engine will stop.
If the indicator flashes, immediately take the
shortest route to land.
If the engine stops, tow your PWC to land.
This indicator is usually off.
Resets the tripmeter and time meter to zero (0)
(page 26).
Also used to set the digital clock (page 32).
Selects the mode of the multi-function meter: digital
clock, tachometer, time meter, tripmeter, hourmeter.
Selects ON or OFF for the limit mode.
Also used to set the digital clock (page 32).
Instruments & Controls
23