Is Your PWC Ready To Ride?
Check that the lanyard is in
Safety
good condition and the lock
Lanyard
clip is securely attached.
Replace if necessary.
Insert the lock clip in the
Fuel Level
engine stop button/switch and
check the fuel gauge.
Remove the lock clip. Add
fuel, if necessary (page 120).
Pull the reverse lever to make
Reverse
sure it moves smoothly
System
without sticking. Check that
the bucket drops over the jet
pump steering nozzle.
Inspect for cracks or damage.
Hull
Remove any marine growth.
58
Before Riding
Bilge Drain
Check that the plugs are
Plugs
secure.
Jet Pump
Check that nothing is
Water Intake
obstructing the intake grate of
the jet pump, driveshaft,
cooling water filter, or
impeller. Remove any debris.
Loose Parts,
Look for anything that
Latches
appears unusual. Check that
all latches (including the seat)
are secure.