If A Fuse Blows - Honda ARX1200N2 2004 Owner's Manual

If a Fuse Blows

All of the electrical circuits on your PWC
have fuses to protect them from damage
caused by excess current flow (short circuit
or overload) .
If something electrical on your PWC stops
working, the first thing you should check for
is a blown fuse. Determine from the chart on
the circuit fuse box cover which fuse or fuses
control that component. Check those fuses
first, but check all the fuses before looking
elsewhere for another possible cause of the
problem. Replace any blown fuses and check
component operation.
The circuit fuse box is located in the engine
compartment below the rear tray.
186
Taking Care of the Unexpected
Recommended Fuses
main fuse
other fuses
To prevent an accidental short circuit, remove
the lock clip before checking or replacing the
fuses.
30 A
5 A, 7.5 A