Honda ARX1200N2 2004 Owner's Manual page 139

Engine Oil & Filter
7. Apply a thin coat of engine oil to the
rubber seal (6) of a new oil filter.
(6)
(6) oil filter rubber seal
8. Install the new oil filter and tighten it by
hand.
9. Using an oil filter wrench attachment and a
torque wrench, tighten the new oil filter to
the specified torque:
· ·
20 lbf ft (26 N m, 2.7 kgf
132
Servicing Your Honda
·
m)
10. Install the oil drain pipe cap.
Add Engine Oil:
11. Fill the oil tank with the recommended oil
slowly (page 123).
If the oil filter was replaced, use
approximately:
4.5 US qt (4.3R)
If the oil filter was not replaced, use
approximately:
4.4 US qt (4.2R)