Flash Timing - Polycom SoundStation2W User Manual And Administrator Manual

Flash Timing

You can adjust the timing of the Flash de-
lay to 75, 100, 300, or 600 milliseconds.
1. Press the Menu button, choose Ad-
min Setup and press the Select but-
ton, enter the passcode (if required)
and press the
2. Choose Phone System followed by
Flash Timing from the available op-
tions and press the Select button.
3. Use the <- and -> soft keys to step
through the available Flash Timing
options.
4. Press the
SAVE
changes. You may press the Exit
button to cancel your selection.
5. After about 15 seconds you should
hear the tone, and you should see
READY appear on the console's
LCD screen. This indicates that the
console and base station have recon-
nected. The new settings will now
be active.
D i t d o c u me n t wo r d t u a a n g e b o d e n d o o r T e l e c o mH u n t e r . D é z a k e l i j k e T e l e c o m we b s h o p .
T 0 8 8 7 4 6 3 4 4 4 | @ s a l e s @T e l e c o mH u n t e r . n l | www. T e l e c o mH u n t e r . n l
soft key.
ENTER
soft key to save
SoundStation2W™ Administrator Guide - 34
ADMIN SETUP
LOCATION
PHONE SYSTEM
PASSCODE
FLASH TIMING
500 mS
If you change the Flash Timing
setting while you are on a call, the
new setting will become stored as
soon as the user goes back onhook
after the call.
SAVE