Polycom soundstation vtx 1000 Quick Installation Manual

Answer a Call
Press the (Phone) button to pick up an
incoming call.
The three LEDs blink green when the phone rings.
Dial a Call
You can dial a call the traditional way,
getting a dial tone first, or you can
dial the way cellular phones do, entering
and editing all the numbers before
you outpulse them, as shown below.
Dial Tone Dialing
Press the (Phone) button
1
to get a dial tone.
Dial the phone number.
2
Each number is dialed when
you press it.
Speed Dial numbers are not
supported by this method.
End a Call
To end a call, press the button.
If more than one party is connected,
all calls will be disconnected when
you press the button.
The duration of your ended call
will be displayed for 20 seconds.
For all other phone functions and
information, please see your SoundStation
VTX 1000 Operation Manual.
When you answer a call from another VTX
phone, your SoundStation VTX 1000 tests
the quality of your line, and then initiates
a wideband connection. This process takes
6-12 seconds, during which you hear
music, and both ends of the call are unable
to converse. The icon
is displayed once a wideband connection
has been established.
Editable Dialing
Dial the phone number.
1
If you make an error,
press the <DEL soft key to erase it.
If you want to cancel the call,
press the CANCEL soft key.
Press the button or
2
the SEND soft key, and the
complete number will be dialed.
SEND
OR
CALL ENDED (555)555-1111
0:05:23
SP DIAL PH BOOK REDIAL
1725-07247-015 Rev.B