Keyboard Wedge — cont.
Wedge Quiet Interval
Quiet Interval is the amount of time to look for keyboard activity before the scanner breaks the
keyboard connection in order to transmit data to the host.
START / END
Selectable from 000 (no interval) to 255 in 10 msec increments. To configure this feature, scan the "START/END" bar code above to
place the unit in Programming Mode, then the
the Alphanumeric table in
Appendix C, Alpha-Numeric Pad
scanning the "START/END" barcode above.
Product Reference Guide
This feature does not apply to the USB Keyboard
interface.
NOTE
PROGRAMMING BARCODES
Set Wedge Quiet Interval
DEFAULT SETTING FOR THIS FEATURE:
010 (100 msec)
bar code followed by the three digits (zero padded) from
representing your desired length. Exit programming mode by again
Set Wedge Quiet Interval
Interface Features
3-35