Table of Contents
Advertisement
RS-232 Interface Features — cont.
Retry on ACK NAK Timeout
Enables/disables retry after the configurable ACK NAK Timeout Value (set in the following fea-
ture) has expired.
START / END
Enable Retry on ACK NAK Timeout
DEFAULT
ACK NAK Timeout Value
START / END
This item specifies the time the scanner will wait for an ACK character from the host following a label transmission.
000 = Infinite timeout
001 - 075 = Timeout in 200-millisecond increments
To configure this feature, scan the "START/END" bar code above to place the unit in Programming Mode, then the "Set ACK NAK
Timeout Value," followed by the three digits (zero padded) from the Alphanumeric table in
senting your desired value. Exit programming mode by again scanning the "START/END" barcode above.
Product Reference Guide
PROGRAMMING BARCODES
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE: 001 (200 msec)
Disable Retry on ACK NAK Timeout
Appendix C, Alpha-Numeric Pad
Set ACK NAK Timeout Value
Interface Features
repre-
3-21
Advertisement
Table of Contents
