Table of Contents
Advertisement
ACK NAK Options
This enables/disables the ability of the scanner to support the RS-232 ACK/NAK protocol.
When configured, the scanner and/or host sends an "ACK" when it receives data properly, and
sends "NAK" when the data is in error. Selections for this option are:
•
•
•
•
START / END
Enable ACK NAK for Transmission
Enable ACK NAK for transmission and host command
Product Reference Guide
Disable
Enable for label transmission — the scanner expects an ACK/NAK response from the host
when a label is sent
Enable for host-command acknowledge — the scanner will respond with ACK/NAK
when the host sends a command
Enable for label transmission and host-command acknowledge
PROGRAMMING BARCODES
Disable ACK NAK
DEFAULT
Enable ACK NAK for host command acknowledge
Interface Features
3-19
Advertisement
Table of Contents
