Skoda Yeti Owner's Manual page 128

Button Action
Press briefly
3
Press button for a
3
long period of time
Press briefly
4
Press briefly
5
Press briefly
6
Turn upwards
6
Turn downwards
6
a)
Only valid for the navigation system Columbus.
Note
The loudspeakers in the vehicle are adjusted to the power output of the radio
■
and navigation system of 4x20°W.
For the equipment sound system, the loudspeakers are matched to a power
■
output of the amplifier of 4x40°W + 6x20 W.
AUX-IN and MDI inputs
The AUX-IN input is located below the front armrest and is marked with .
The MDI input is located in the front centre console.
The AUX-IN and MDI inputs are used to connect external audio sources (e.g. iPod
or mp3 player) and to play back music from these devices via the factory-fitted ra-
dio or navigation system.
For a description of use, refer to the operating instructions for the relevant radio
or navigation system.
126
Using the system
Radio, traffic information
Changing to the previously stored radio station
Changing to the previously stored traffic information
Interrupting the traffic report
Interruption of the traffic report
Interruption of the traffic report
Display of the stored/accessible stations
scroll upwards
Interruption of the traffic report
Display of the stored/accessible stations
scroll downwards
Interruption of the traffic report
Ð
Ð
changing the audio source
Call up the main menu
CD change
The CD changer for the radio and navigation system is located in the left side trim
panel of the boot.
Inserting the CD
›
Touch the button » Fig. 114 and guide the CD (compact disc) into the CD-case
C
. The CD is automatically loaded onto the lowest free position in the CD
B
changer. The indicator light in the corresponding button
CD/CD changer/MP3 Navigation
Changing to the previous title
Fast rewind
without function
Changing to the previous title
Changing to the next title
Fig. 114
The CD changer
stops flashing.
D
without
function
£